FAQ
How do you replace the strings on a crossbow or a bow?
Use a portable string changer to replace it.
How long should a bowstring last?
With proper maintenance of the bowstring and crossbow body, the bowstring can withstand at least 100 shots, and hundreds of shots are not uncommon. Correct maintenance involves applying lubricant to the area where the bowstring contacts the rail and keeping the rail clean and free of scratches, dents, burrs, dirt, and debris. The lifespan of the bowstring varies depending on maintenance, the number of shots fired, and exposure to extreme weather conditions.
How can the service life of a bow made from composite materials be extended?
Your owner’s kit contains a tube of lube wax, which should be applied to the flight track every 5 to 10 shots. Lube Wax should also be applied anywhere the cables make contact with the cable slide or Teflon tape, whichever is applicable, every 20 to 30 shots. To extend the life of your cables it is important to apply Lube Wax to all non-served areas of the cables and string every 30 to 50 shots or when white fuzz begins to appear. If the crossbow has been exposed to excessive moisture you may need to apply wax sooner.
A frequently asked question surrounding your service
How long can I keep my bow fully drawn?
It is safe to keep your bow cocked while you are hunting in a stationary position. FOR PERSONAL SAFETY REASONS, DO NOT STALK OR WALK TO AND FROM YOUR STAND WITH YOUR BOW COCKED. We do recommend that if you break from your hunt that you let the bow down to the un-cocked position by shooting a target arrow into a safe backstop. It would be good practice to let the bow down every 4 hours relax it for about ½ hour. If ending your hunt without having taken a shot, it is recommended you keep a practice arrow at your camp to fire the crossbow safely into a target.
Why do my arrows shoot to the left or right?
This issue can be easily addressed by checking whether the bowstring is off-center. If the string is shifted to the left or right, the arrow will veer in that same direction. Even a deviation of just 1/8 inch can cause the arrow to miss the target by several inches. To resolve this, make a mark on the bowstring at the exact center point where it crosses the arrow track while the bow is unstrung. The next time you string and shoot the bow, ensure that this mark aligns with the center of the trigger mechanism. If the string remains off-center after stringing, grasp the string and shift it to the center position while the safety is engaged.
Another potential issue is more technical in nature: your bow may have unbalanced limbs (an alignment issue). This can occur if the limb bolts—which secure the limbs to the bow body—have been adjusted. To accurately check for limb imbalance, measure the distance from the limb-to-riser connection point to the bowstring on both sides of the riser. If the measurements differ, the limbs are unbalanced. It is best to have a dealer adjust the limbs to correct this issue. All Aurixonbow compound crossbows come from the factory with limb balance and draw weight pre-set.
Why do the arrows shot from my bow sometimes fly high and sometimes low?
If you are using practice points, simply adjusting your sight should resolve the issue. Additionally, please verify that all your arrows have the same length and shaft specifications.
If you are using broadheads, you may encounter “planing,” a phenomenon where the blades experience air resistance during flight. This issue can only be resolved by switching to a different type or brand of broadhead.